Cutting how to deal with grey fabric surface defects

2016-01-09 21:10:21

Based on the defects forming cause and effect. Take off when some defects can be cropped, but lack of density and width is not uniform and embrittlement, the whole cloth of the residual defect is impossible to remedy in a CD command: some, such as chromatic aberration, color care must be amended by dye back to: but for localised defects, residual, borrow the CD and other methods can be used to remove. Main methods are as follows Baseball Jersey

 

1, stitch it is the most common treatment method. With the principle of joint width small defects, such as needles, flower pins, cloth edge wind stains, small holes, refer to electric knife cut the cut line of Chen.

 

2, shift to a limited number of defects (maximum of dug shoulder-length) to need to dig the CD parts (such as dig collar, shoulder) take off.

 

Method 3, modified the width 1.5cm wide, longer defects can change the CD process (change the kind of small one or two). Such as the original CD 90cm of products to cut 86cm or 80cm products, CD sleeve or body modification or other attachments.

 

4, cutting method on the long flower pin whole piece defects (in one line) should be carried out along the faults cut the cylinder fabric width for jacking blanking.

 

5, the new law can't escape the larger defects or more remnant fabric section. Should be cut out. Otherwise it uses.

 

6, method, take more complex defects encountered in the plant, you can be turned down. But each piece can only lie down again.

 

7, bulk material usage of cutting material defects will be accepted. Cut up into small pieces parts (such as spell, collar, slit Pocket cloth) or to cut gloves, hats, insoles, excrement and other insurance products or child month.

 

When the machine automatic cutting material, but people borrowed the CD which is not practical, can only be made in the inspection mark. Residual defects after the cut has been completed there will be picking out pieces. So when you use machine-cut, paying special attention to fabric quality control, otherwise it will cause a waste of surprisingly.